?manipulator
manipulator發音
[mə'nipjuleitə]
英： 美：
manipulator中文意思翻譯
n.操縱器, 操作者
manipulator詞形變化
動詞過去分詞: manipulated |副詞: manipulatively |名詞: manipulability |動詞過去式: manipulated |動詞第三人稱單數: manipulates |動詞現在分詞: manipulating |形容詞: manipulatable |
manipulator常見例句
1 、Use its manipulator arm to deliver presents to several houses, as well as take cookies from each house.───使用它的機械手臂送入禮物于數個房子，以及由每個房子拿取餅干。
2 、The dynamics of robotic manipulator with the parallelogram hinged mechanism were investigated while it motioned in plane.───摘要以具有平行四邊形鉸鏈機構的操作機器手為研究對象，對其平面運動時的動力學問題進行研究。
3 、China is pledging to maintain its currency at a "reasonable and balanced level," after the United States refrained from calling Beijing a currency manipulator.───中國保證把人民幣匯率保持在合理與平衡的水平上，此前美國避免指責北京操縱人民幣匯率。
4 、She was a good manipulator and could manipulate for things that she wanted.─── 她很會耍手段 為了得到她想要的東西會耍手段
5 、Abstract: The research based on the kinematic character of the manipulator indicates the system is equipped with constrains of nonholonomic.───摘要:本文通過對此非完整機械手的運動特性的研究表明了該系統具有非完整約束型。
6 、This paper presents a trinal-branch space robotic manipulator with redundancy, due to hash application environments, such as in the station.───基于例如空間站等惡劣的應用環境,研制了一種具有冗余度的三分支空間機器人。
7 、The principle and structure of new type consumable-self cabon-oxygen gun manipulator are introduced in the paper.───介紹了自耗式碳氧**操縱器工作原理、結構特點。
8 、Experimental results show that the robot manipulator can grasp objects safely and compliantly.───實驗結果表明，該機器人操作手可實現對物體安全、柔順的抓取操作。
9 、The collision is considered in the solution, so that the manipulator based on this solution method can move more flexible.───同時在求解的過程中利用罰函數法，對逆解過程進行避碰優化，使得基于該逆解方法的機械手運動控制更具靈活性。
10 、About the problem of object orientation of longan and lychee picking manipulator，a experiment system on camera calibration based on binocular stereo vision is proposed.───摘要 針對龍眼和荔枝采摘機械手的目標獲取問題，文章提出了基于雙目立體視覺的攝像機標定的實驗系統。
11 、The manipulator s structure, operation principle and hydropneumatic system are described systematically in the paper.───介紹一種兩自由度液壓驅動式上料機械手，包括其機構設計、工作原理及液壓氣動系統。
12 、This paper presents the motion planning algorithm of a differential drive mobile manipulator.───提出了差動驅動式移動機械手的運動規劃算法。
13 、The article focuses on the new type of manipulator in the aspectof driving device and joint instruture,and solves completely the number and the quality of motor.───在機械手的動力傳輸和關節結構方面提出了新的構想，以一種新型的傳動機構較好地解決電機數量和重量問題。
14 、For solving the problems of coordinated control of mobile manipulator, this paper presents the motion planning of a wheeled mobile manipulator.───為了解決移動機械手協調控制問題,研究了輪式移動機械手的運動規劃方法。
15 、If you're gonna use my past to manipulate me, make sure it's not a story I made up to manipulate someone else.─── 如果你想用這種往事來讓我上當 就要保證這不是我用來騙別人的故事
16 、She would, but she's a master manipulator.─── 需要 但她擅于操控他人
17 、Main business: machine tools, equipment Reclaimer machine, forging manipulator, casting auxiliary machines, textile machinery, large castings and non-standard design.───主要經營：機床設備、裝取料機、鍛造操作機，鑄造輔助機、紡織機械、大型鑄件及非標設計等。
18 、Kokinko: In a much-anticipated semiannual report, the Treasury stopped short of labeling Beijing a currency manipulator, which could trigger sanctions under U.S. Law.───在備受期待的半年報告中,美國財政部放棄將中國定為匯率操縱國。而操縱匯率的國家將會受到美國法律的制裁。
19 、In written testimony to the Senate last week Timothy Geithner invoked the dreaded 'currency manipulator' label intimating that China is deliberately undervaluing the yuan.───在最近提交給參議院的書面證詞中，蓋特納使用了“匯率操縱國”這個可怕的標簽，表示中國有意地低估了人民幣。
20 、No, it's ridiculous, and even if it was possible, manipulating a light is nothing compared to manipulating the machine.─── 不 這太荒謬了 就算真的有可能 控制一盞燈與控制一臺機器 根本就是小巫見大巫
21 、I didn't manipulate her. I empathized with her.─── 我不是操縱她 我是同情她
22 、Vibration control is the main task in flexible manipulator controlling.───振動控制是柔性臂控制的主要任務。
23 、The relationship between the structure error and executor error of the 3-RRRT parallel manipulator has been studied through the inverse position analysis.───摘要基于3-RRRT并聯機器人位置反解方程，分析并聯機器人結構誤差對機器人末端誤差的影響。
24 、And the manipulator's principle as well as the structure, the hydraulic system and the control scheme of PLC were discussed in detail.───對系統的工作原理及機械本體、液壓驅動和PLC控制方案等方面進行了較為詳盡的論述。
25 、It provides a strong means for manipulator on workspace analysis and Synth -esis and error analysis and synthesis.───為并聯機械手的工作空間分析與綜合、誤差分析與綜合等提供了一個有力的工具。
26 、The technology of PLC was applied to control the hydraulic manipulator of the CNC machine,the intelligent and flexible control for the system was realized.───以數控機床的上下料機械手為研究對象,采用可編程控制器(PLC)對其液壓驅動裝置進行控制,實現了系統的智能化和柔性化。
27 、In order to restrain low frequency vibration of flexible manipulator, hysteretic damping of assembled flexible link is used to restrain the vibration of flexible manipulator.───摘要為抑制柔性機械臂的低頻固有振動，該文提出利用組合結構滯遲阻尼效應來提高柔性機械臂的抑振性能。
28 、These results can be used as the reference for application of solid lubricants bearings used in space manipulator joints.───為采用固體潤滑技術解決空間機械臂關節軸承潤滑問題提供了依據。
29 、In accordance with the maximization of operationable space of micro-nano manipulator, an analysis was carried out upon the Jacobi matrix of micro-nano manipulator.───依據微納操作器的可操作空間最大化，對微納操作器的推可比矩陣進行了分析。
30 、Anor worked both as a subtle manipulator and a political firebrand, disrupting the politics of local systems and stirring up trouble for the New Republic and the new Jedi order.───亞諾同時身為微妙的操縱者和政治挑動者，擾亂區域星系的政治，替新共和和新絕地信條制造麻煩。
31 、The paper introduces a pneumatic flexible bending joint,which can be applied to a manipulator.───提出一種波殼伸縮式的彎曲關節,及其構成的機械手。
32 、A novel parallel manipulator for laser cutting is presented.───提出了一種新型激光切割并聯機床。
33 、Critical of earlier historians who tended to treat Garibaldi with condescension, Ms Riall is anxious to display him as the resourceful manipulator of his own legend.───對于那些認為加里波第好強人所難的早期歷史學家所做出的批判，Riall女士急于展示出加里波第在其自身的傳奇中其實是一位足智多謀的**。
34 、This paper introduces hardware circuit structure of glassware grabbing manipulator and programming skills.It presents a way for time control of this manipulator.───介紹了鉗杯機械手的硬件電路結構及軟件編程的技巧，并敘述了機械手時間控制的一種方法。
35 、In a much-anticipated semiannual report, the Treasury stopped short of labeling Beijing a currency manipulator, which could trigger sanctions under U.S. Law.───在一份半年一期的預測報告中,財政部停止將北京標簽為貨幣的操縱者,這在美國的法律在可能會引發制裁。
36 、Have well realized the level orientation problem of the pneumatic manipulator.───很好地實現了氣動機械手的平面**問題。
37 、You're trying to manipulate someone into thinking I'm manipulative.─── 你現在才是在耍手段讓大家以為 我在耍手段
38 、When the motion law of rigid body of manipulator is known the elastic motion law of its platform and of each joint of legs cam be found out by this KED equation.───已知機器人的剛體運動規律，由此方程可以求出其平臺以及腿部各關節的彈性運動規律。
39 、Therefore, a parallel control method of compound orthogonal neural network(CONN) and PID is presented, and is compared with a parallel control of CMAC and PID in manipulator neural network controls.───為此在機械臂的神經網絡控制中,該文提出復合正交神經網絡(CONN)與PID并行控制方法,并對小腦模型(CMAC)與PID并行控制作一比較研究。
40 、When the frist grade flexible mode and the rigid mode are intercepted the flexible manipulator is transformed into a quadratic system.───基于柔性臂簡化的二階線系統模型，指出前饋延時控制在本質上是一種零極點對消技術，得到了零極點對消應滿足的條件。
41 、A predictor-corrector method to get the forward solution of a 6-SPS parallel manipulator was presented based on the principle of position tracking.───摘要以6-SPS并聯機構為例，基于路徑跟蹤原理，提出一種求解并聯機構位置正解的預估－校正法。
42 、This paper provides a method to grasp static objects in unstructured environment with a manipulator guided by human-machine cooperation techniques.───摘要介紹了一種利用人機合作技術在非結構環境引導機械手抓取靜態目標的方法。
43 、Design of Manipulator Control System Based on Move-control Chip.───基于運動控制芯片的機械手控制系統設計。
44 、Waldron, K.J., 1982, “Geometrically Based Manipulator Rate Control Algorithms,” Mechanism and Machine Theory, Vol. 17, No. 6, pp. 379-385.───盧添福,1990,“四軸機械臂之研制,”國立成功大學機械工程研究所碩士論文,臺南.
45 、The characteristic equation of nonsymmetric oil jar of the manipulator is derived from the matching nonsymmetric proportional direction control.───對于機械臂各連桿的非對稱油缸，推導出當采用與之相匹配的非對稱比例換向閥控制時的特性方程。
46 、The application of 6-RTS parallel manipulator to centered assembly is explored.───探討 6 -RTS并聯機器人在裝配對中的應用。
47 、Results of applications to robust controller design for a two-degree-of-freedom manipulator with parameter uncertainties demonstrate the efficiency of the proposed method.───對存在參數攝動的二自由度機械臂進行魯棒控制器設計的結果表明，所提出的方法是有效的。
48 、Based on the concepts of reciprocal screws and thei r linear correlativity,a detecting method of input interference in a spatial par allel manipulator is presented.───提出一種基于螺旋系線性相關性和約束反螺旋概念的空間并聯機器人輸入原動件選取合理性的判別方法。
49 、Varies parameters can set by keyboard and display the actual value, like size, backhaul height, top stop time, manipulator displacement and the corner of tongs.───各種鍛造參數如鍛件尺寸、回程高度、上停時間、操作機大車行走位移和鉗口轉角等均可通過鍵盤設定，并及時顯示實際值。
50 、Manipulator for shell making has experienced the developed stages from mechanical transmission to hydraulic transmission to high automation.───制殼機械手經歷了機械傳動、液壓傳動到高度自動化等幾個發展階段。
51 、Fichter, E. F.,”A Stewart Platform-Based Manipulator: General Theory and Practical Construction,” Int. J. Robotics Research, Vol. 5, pp. 157-186, 1986.───宋長耀,“利用齊次轉換矩陣分析骨外固定器之調整分析范圍與肱骨骨內固定器之固定姿勢”，國立臺灣大學醫學工程研究所碩士學位論文,民國91年。
52 、The micro-nano manipulator, acted as an executive mechanism, is one of the key components of micro nano operational system.───摘要作為一執行機構，微納操作器是納米操作系統的關鍵部件之一。
53 、The Jacobian matrix of the parallel manipulator had been derived by taking the derivative of the constraint equations.───利用對機構約束方程求導數法得到機構的雅可比矩陣。
54 、It can schlep six drill pipes at the same time, which achieves automatic replacing of pipe by the manipulator driven by the hydraulic system, and has high efficiency and security.───它可同時攜帶6根鉆桿，由液壓系統控制機械手裝卸鉆桿并自動換桿，效率高，安全性好。
55 、While there happened a failure in a joint of an ordinary 6R manipulator it becomes a 5R manipulator or calls it an insufficient DOF manipulator.───摘要一般6R機械手在一個關節發生故障時，成為5R機械手或稱欠自由度機械手。
56 、I came up with the idea by myself, and after that created the sound with our manipulator.───我自己想出這樣的概念,然后和我們的。
57 、The reconfiguring modular manipulator is a kind of concept, which assembles different robots by universal modules according to especial missions.───可重組模塊化機器人是一種根據特定任務要求利用通用模塊來組裝成不同機器人的思想。
58 、Based on the Lagrange equation,the multi-joint robotic manipulator dynamical model is transformed into a linear state equation.───基于拉格朗日方程,把多關節機器人機械臂動力學模型轉化成一線性狀態方程。
59 、Based on the multi-bodies systems dynamitic, the most general dynamic equations of flexible manipulator were derived at first in this paper.───摘要以多體系統動力學為基礎，建立了柔性機械手最為普遍的動力學方程所建立的方程。
60 、Out main products are as follows:rail forging manipulator, discharger for forging, railless manipulator, railless discharging machine, heat treatment discharging machine.───“誠信為本，合作共贏”，高質量的產品和高品質的服務，始終是我公司的宗旨。
61 、The clip manipulator appears.───剪輯操作器出現。
62 、By practicing the machine as a model of joint, we build up a open-chained nonholonomic manipulator.───并以此作為關節模型，組成了開鏈多關節機械手臂。
63 、In order to perform automatic cladding of large scale shell cover,the positioner and the manipulator are combined based on flexible control techniques.───為實現大型封頭自動堆焊,提出了對變位器、操作機進行技術改造,組合使用并進行柔性控制的方案。
64 、Based on this principle, a simply and direct net method to distinguish the singularity of the parallel manipulator is derived.───依據此原理得到一種新的判別并聯機器人機構奇異的簡捷方法。
65 、He was a backstage manipulator.───他是幕后人物。
66 、According to the process of the mono-lever manipulator's data acquistion, two effective processing methods-floating zero and nonlinear are presented.───就單桿操縱器讀值的處理，提出了浮動零點、非線性處理這兩個行之有效的處理方法。
67 、A reply like, "I have the final word," could mean she's a "Manipulator Boss.───如果回答是：“我有最終的決定權”，這就意味著她是“控制型上司”。
68 、The workspace of this manipulator is researched by analyzing the boundary of the workspace on the basis of its inverse solution.───在其位置逆解的基礎上,通過邊界搜索法獲得了并聯機床的工作空間,探討了其結構參數對工作空間的影響。
69 、This paper introduces the way of solid lubricants bearings used in space manipulator joints, and the improved performances of solid lubricants film are analyzed.───摘要介紹了空間機械臂關節軸承的固體潤滑方式，分析了跑合對固體潤滑膜潤滑性能的改善作用。
70 、The singularities of manipulator as a base of the design of manipulator's structure and control algorithms are analyzed.───作為冗余機械臂結構設計和控制算法設計的理論基礎，本文對機械臂的運動奇異性問題進行了分析。
71 、People call it manipulation, but it's not manipulation.─── 人們稱之為"操控" 但這不是操控
72 、The Treasury under George Bush, particularly in recent years, preferred a softer behind-the-scenes approach and refused to brand China a manipulator.───布什的財政部，尤其是這幾年來，一直采取都是柔和的，秘密的措施，他們一直拒絕給中國貼上操控者的標簽。
73 、Look, ladies, I tried to manipulate you, and I am sorry about that, but you guys have been manipulating my friend for months.─── 女士們 我的確曾試圖欺騙你們 對此很抱歉 但是 你們這幾個月來也一直在欺騙我的朋友
74 、The relevant experiments of Cartesian Coordinate RAMS Master Manipulator are done and the experiment results are evaluated by standard of the useful data from ergonomics.───在笛卡兒坐標式RAMS主操作手實物模型的基礎上,進行相關實驗,并采用人機工程學的相關理論作為標準評價,驗證方案的合理性。
75 、He is the great manipulator and pointed the way to success.───他是一個偉大的巧匠，他指出了一條通向成功的路。
76 、Based on electronic theodolite, a novel method for testing the kinematic accuracy of manipulator is developed for the first time.───基于電子經緯儀首次提出了一種全新的機械臂末端執行器位姿精度測試方法。
77 、A re-programmable, multifunctional manipulator designed to move material, parts, tools, or specialized devices through various programmed motions for the performance of a variety of tasks.───可重復編程的多功能操縱器,設計成通過不同的編程動作為執行多種任務移動原料、部件、工具或?qū)ｉT的設備。
78 、As a manipulator, Updike succeeded in incorporating his idea into the rewriting in the field of consumer culture.───并指出**借古喻今、戲仿名人，一方面利用名人意識，另一方面又充滿著濃郁的女性主義色彩，是美國消費文化領域的一位操手。
79 、The kinematics of the mobile manipulator, which consisted of an omnidirectional mobile platform and a holonomic manipulator mounted atop the platform, was set up.───建立了基于全方位移動平臺的移動機械手的廣義運動學模型。
80 、Using the Niche Genetic Algorithms and the simplex method, basing on this three DOF manipulator, the control algorithms are programmed.───分別采用小生境遺傳算法與單純形法設計了基于三自由度機械操作臂的控制算法；
81 、A method for the inverse kinematics is proposed for the given position, orientation of the end and curve of the manipulator body.───提出了長鏈柔性雙二重八面體變幾何桁架機器人實現末端位置和法向以及長鏈本體形狀的逆位置分析方法。
82 、Yeah, but but you you manipulated me.─── 是啊 但你...操控了我
83 、Key words: robotic manipulator, driving system, dissipated energy, computer control.───關鍵詞：機器人機械手臂，驅動系統，耗能，計算機控制
84 、The answer is the “shadow shogun”, Ichiro Ozawa, a master manipulator who secured an historic victory for the Democratic Party of Japan (DPJ) in August elections.───他是確保日本民主黨在八月份選舉中取得歷史性勝利的主要幕后操縱者。
85 、The Bush administration purposely did not use the term “currency manipulator” to avoid antagonizing the Chinese, even when it was criticizing China’s trade policies.───布什政府即使是在批評中國貿易政策時，也刻意回避用“操縱匯率”這樣的詞，避免與中國為敵。
86 、Schumer said he still believes China is manipulating its currency, but that 'this wouldn't have been the opportune time' to designate the country as a manipulator.───他表示，自己仍然認為中國在操縱匯率，但現在恐怕不是將中國列為匯率操縱國的恰當時機。
87 、The detailed structure of Cartesian Coordinate RAMS Master Manipulator is stated and the concise structure of PHANToM Desktop is introduced.───對笛卡兒坐標式RAMS主操作手的具體結構進行了詳細的闡述,并對關節式RAMS主操作手PHANToM進行了簡單的結構介紹。
88 、They were manipulated into it by a lawyer.─── 他們受一個律師擺布才上訴的
89 、And, its controllable quality is proved, which show the manipulator is controllable.───并且，證明了其可控性，表明此機械手是可以控制的。
90 、Statusque and developments of heating furnace domestic and overseas for forging press have been introduced with description of technical developments of manipulator.───介紹了國內外鍛造液壓機用加熱爐現狀及發展，同時敘述了與鍛造液壓機配套的工具操作機的技術發展。
以ator結尾的名詞有哪些？
decorator n.裝飾者；
deflator 減縮指數，消除通脹因素指數；
demonstrator n.示威；
denominator n. 分母,命名者；
educator n. 教育家；
elevator n.電梯；升降機；
emulator n. 仿真器，仿真程序；
equator n.赤道，天球赤道；
lubricator n. 潤滑器；
manipulator n. 機械手；
mediator n. 調停者,仲裁人,基督；
moderator n. 調解人，仲裁人
c語言里面的endl代表什么？
endl是C++標準庫中的操控器（Manipulator），包含于()，命名空間(namespace)：std。注意endl(為字母l)而非end1(數字1)。
意思:一行輸出結束，然后輸出下一行全稱:end of line
endl英語意思是end of line,即一行輸出結束，然后輸出下一行。endl與cout搭配使用，意思是輸出結束。