?elastomer
elastomer發音
英：[??l?st?m?(r)] 美：[??l?st?m?]
英： 美：
elastomer中文意思翻譯
n.彈性體
elastomer詞形變化
形容詞: elastomeric |
elastomer常見例句
1 、However, the elastomer becomes hard and torques increase.───但是，彈性材料會變硬，扭矩也會增加。
2 、This thesis introduces the research actualities of new type of polyurethane elastomer at home and abroad and the developing prospect in the days to come.───主要介紹了聚氨酯彈性體新型材料的國內外研究現狀,以及今后聚氨酯彈性體的發展前景和展望。
3 、The technological process and parameters, performance of spray polyurea elastomer are introduced.───介紹了噴涂聚脲彈性體系列材料的生產工藝、施工參數及性能。
4 、By the right surface modification on mineral,the obvious reinforced effect on the NBR/PVC elastomer was obtained.───對礦物填料進行適當?shù)母男蕴幚?使丁腈橡膠/聚氯乙烯(NBR/PVC)彈性體具有明顯的補強效果。
5 、Supported Shaft Seal: Bonding of elastomer to phenolic backing ring protects against distortion, a common cause of shaft leakage.───支撐性軸密封：彈性材料與酚醛背襯環的緊密結合體，有效防止由于扭曲變形導致的軸泄漏。
6 、A kind of high impact polypropylene(PP) composite was developed with PP as basic resin, thermoplastic elastomer (POE) as toughening modifier and treated talcum power as filler.───以聚丙烯(PP)為基體樹脂,(乙烯/辛烯)共聚物(POE)為抗沖改性劑,滑石粉為填料制得了高抗沖PP復合材料。
7 、Application of polymer polyol in microcellular polyurethane elastomer(MPUE) was researched.───對聚合物多元醇在聚氨酯微孔彈性體中的應用進行了研究。
8 、The elastomer pinch sleeve shall be one piece construction with flanges, drilled to be retained by the flange bolts.───人造橡膠夾管套管應該是一件式結構，并帶法蘭安裝孔，以便固定法蘭螺栓。
9 、Sealed with the Burgmann MG1 elastomer bellows mechanical seal.───其密封選用博格曼MG1橡膠波紋管機械密封。
10 、Therm o-plastic elastomer SBS is the biggest polymer modifier in the world used in bi tumen modification.───SBS熱塑性彈性體是目前世界上改性瀝青用量最大的聚合物改性劑。
11 、The T g of polyester soft segment is higher than of polyether soft segment,and the elastic modulus increases in the order of PPG PEG PTMG in the PU elastomer.───在PU彈性體中 ,聚酯軟段比聚醚軟段的Tg 高 ,彈性模量依PPG、PEG、PTMG軟段順序增加
12 、Bearings of the 2RS design have an integral double lip rubbing seal (fig 10), of polyester elastomer or polyurethane (bearings of series GEZ.───2RS設計的軸承在兩側裝有內部雙唇環摩擦密封件(圖10),密封件采用聚酯彈性體或聚氨基甲酸乙脂制造(GEZ。
13 、Taking the human face as a elastomer. 3.Simulating the facial expression by using elastomer metamorphosing.───3.將人臉五官的基本動作模擬成彈性體的形變，從而建立人臉面部表情動畫。
14 、The selection of shrinkage is one of the critical factors in successful design for large casting polyurethane elastomer (CPUE) mold.───摘要收縮率的選取是決定大型澆注型聚氨酯彈性體(CPUE)模具設計是否成功的關鍵因素之一。
15 、The developments and applications of modified thermoplastic elastomer HMPSA,acrylate HMPSA,silicone HMPSA and amorphous polyolefin HMPSA were reviewed in this paper.───建議國內企業和科研機構開發多種用途的熱熔壓敏膠,擴大其使用范圍,同時應加快壓敏膠性能標準化進程。
16 、This paper introduces construction technology of spray polyurea elastomer used in Beijing Shooting Range CTF.───介紹了奧運射擊中心飛碟靶場看臺屋面防水耐磨工程采用噴涂聚脲彈性體的施工工藝。
17 、N.R.Legge, G.Holden, H.E.Schroeder, "Thermoplastic Elastomer：a comprehensive review,"Carl Hanser Verlag, Munich, Vienna, New York(1987).───小松公榮,"熱可塑性彈性體技術手冊",謝立生譯,臺灣復文興業股份有限公司(1997).
18 、They are widely used in high elastic resilient cold cure, microporous elastomer and semi-rigid polyurethane foam plastics.───廣泛應用于高回彈冷熟化，微孔彈性體及半硬質聚氨酯泡沫塑料制品。
19 、Shanghai Fu Jin Rubber Co., found a Thermoplastic Elastomer business with research, development, production and sales in an integral whole unit.───上海富瑾橡塑有限公司是一家集研究、開發、生產、銷售于一體的專業熱塑性彈性體生產型企業。
20 、Up to now, there is no report on the dynamically photocrosslinking of PP/EPDM thermoplastic elastomer.───PP/EPDM共混型熱塑性彈性體的動態光交聯至今尚未見國內外有報導。
21 、Abstract: The traditional toughening theory by elastomer and the new toughening theory by non-elastomer are reviewed.───文摘:結合一些科研事實，對傳統的彈性體增韌理論和非彈性體增韌理論進行了綜述。
22 、The fill inside its compresses body of air or liquid, bubble, ropy body, ropy elastomer some kind.───其內填充某種壓縮空氣或液體、泡沫體、粘稠體、粘稠彈性體。
23 、A traditional xanthic disulfide (XD) modified CR was improved greatly and a new trend combining CR with speciality elastomer emerged .───傳統的黃原二硫化物衍生物調節型CR的性能得到了全面提高,出現了CR同特種橡膠結合的新動向;粘接型CR的性能更加完善。
24 、The recant development trend of production and application &thermo plastic elastomer(TPE) in taran are introduced.───介紹了日本最近熱塑性彈性體的生產,應用的開發動向。
25 、The preparation of prepolymer for soft PU elastomer and its application were investigated.───對軟質PU彈性體用預聚體及使用技術進行研究。
26 、Because the stator consists of elastomer and piezoelectric ceramic, degree of freedom and physical field coupling problem need to be solved.───定子由彈性體和壓電陶瓷兩種材料組成，不僅存在自由度耦合問題，而且還存在不同物理場的耦合問題。
27 、Using orosslink and elastomer are a good way to improved the Properhes of ACET/LDPE competies.───交聯和彈性體是改性乙炔炭黑／LDPE體系的較好方法，是提高材料性價比的有效途徑。
28 、The flexible elastomer sleeve molds itself to the encased chain, protecting the deck from turbulent seawater.───具有彈性的人造橡膠套管能夠緊貼著鏈條，保護甲板不受到海水的侵蝕。
29 、The properties and applications for new veritietie were of thermoplastics elastomer are reviewed in this paper.───介紹了熱塑性彈性體新品種的特性與用途。
30 、Shock Eraser Insert: Thermoplastic rubber core inside a thermoplastic elastomer butt cap is pressure fit into the shaft to reduce frame shock and vibration.───減震**片：拍柄內置熱塑性橡膠內核同熱塑性彈性體，有效減少球拍震動。
31 、SANPRENE P is a base material for polyurethane elastomer that is a tough, abrasion-resistant material with elasticity rivaling that of rubber.───SANPRENE P是與抵抗那橡膠的彈性的堅韌，磨蝕抗性材料的聚氨酯彈性體的一種基本材料。
32 、Design of mold and research of process for polyurethane elastomer for oil seal are introduced.───介紹聚氨酯彈性體油封的注射模具的設計及工藝研究。
33 、The feature and application effect of the polyolefin elastomer using metallocene catalyst are discussed.───介紹了茂金屬催化的聚烯烴彈性體作為聚丙烯抗沖擊改性劑的特點及應用效果。
34 、This paper introduces mechanical property, medium resistance, low temperature toughness, age resistance, adhesive tension and construction of sprayed polyurea elastomer.───介紹噴涂聚脲彈性體的力學性能 ,耐介質性、低溫韌性、耐老化性、附著力及其施工。
35 、Abstract: The rare earth-containing PSBR sheet was prepared through vinyl pyridine-SBR (PSBR) latex reacted with rare earth alkoxide, and the thermal oxidation resistance of rare earth-containing composite elastomer was studied.───文摘:利用稀土醇鹽與PSBR橡膠乳液進行反應獲得含稀土復合彈性材料進行抗熱氧化研究。
36 、EPDM is a terpolymer elastomer made from ethylene-propylene diene monomer.───EPDM是一種由乙烯 - 丙烯、二烯單聚物構成的三元共聚物彈性材料。
37 、The effect of lead salt stabilizers and stearate stabilizers on the dehydrochlorination of low-halogens flame-retardant PVC/PNBR thermoplastic elastomer was studied by Congo red method.───在研究鉛鹽類穩定劑、金屬皂類穩定劑的單用、并用,對于低鹵阻燃PVC/PNBR共混型熱塑性彈性體熱穩定性能的影響時發現:鉛鹽類熱穩定劑單用時,熱穩定效果**bO>2PbO。
38 、The characteristics of polyolefin elastomer (POE) and its applications in general purpose plastics-polypropylene are introduced.───介紹了新型聚烯烴彈性體(POE)的優異特性,綜述了POE與通用塑料聚丙烯共混改性的研究進展。
39 、Type R all rubber air operated pinch valve with strong elastomer body is ideal for water, chemical, solids and slurry applications.───型全橡膠氣動夾管閥采用堅固耐用的人造橡膠閥體，特別適合水、化工、固體顆粒和泥漿等應用場合。
40 、Numerical simulation and experimental study for injection molding and fiber orientation distribution of short fiber-thermoplastic polyure-thane elastomer composites were done.───摘要對短纖維－聚氨酯彈性體復合材料的注射充模及纖維取向分布進行了數值模擬和實驗研究。
41 、The manufacture of PU elastomer liner mould has been introduced. The influence on quality of mould and ceram is also discussed.───介紹了聚氨酯彈性體用作模具內襯的制作工藝，對模具及陶瓷質量影響因素加以討論。
42 、The S-shaped structure is used for elastomer .It has reliable multi-layers pouring pastern sealing .───拉壓傳感器（S型）彈性體采用S型機構，多層灌膠，密封可靠；
43 、Thermoplastic polyurethane elastomer(TPU) with chlorinated polyethylene (CPE) and CPE/HPVC (high molecular weight PVC) as modifiers was studied systematically by melt blending.───以CPE和CPE/HPVC為改性劑,用熔融共混的方式對TPU的共混體系進行了系統的研究。
44 、Elastomer Core Material - Soft for great feel, and highly resilient to get the ball rolling quickly.───彈性聚合物核心材質-柔軟的擊球手感與高彈力、快速的擊球滾動。
45 、The structure and material of traducer elastomer were researched, in order to develop a transducer for micro-electronic balance.───摘要為開發一種微型電子秤用小量程傳感器，文章對傳感器彈性體的材料和結構進行了研究。
46 、The workpiece was considered as elastomer, and was deformation when clamped both by bench clamp and fixture was simulated with ANSYS.───將工件視為彈性體，運用有限元分析軟件ANSYS，對采用臺鉗直接裝夾和工裝裝夾中零件產生的變形進行模擬。
47 、At first,general situation of PVC toughened by elastomer are escribed.Then a new way for toughenine of PVC using rigid matters is introduced in details.───文中首先對通常的彈性體增韌PVC共混合金進行了介紹，其次對近年來發展起來的剛性體增韌PVC的研究?jī)?nèi)容加以總結和綜述。
48 、This paper introduced the injection mold design of the Polyurethane elastomer.───介紹聚氨酯彈性體的注塑模具的設計。
49 、Toughening effects of polyphenyl elastomer, ABS, polyolefin elastomer and styrene resins on PS were studied with PS466F as matrix.───以聚苯乙烯 (PS) 46 6F為基體樹脂 ,研究了不同抗沖擊改性劑 :類苯乙烯彈性體、ABS、POE和苯乙烯類樹脂對PS的增韌效果。
50 、The object of this article is to review progress in the study and development of thermalplastic polyurethane(TPU) elastomer blends.───摘要熱塑性聚氨酯是一類具有良好耐低溫、高彈性和耐磨性能的新型彈性體。
51 、Assumes the rubber elasticity under the room temperature, heats up theelastomer which can flow to be called the thermosplastic elastomer.───在室溫下呈橡膠彈性，加熱又能流動的彈性體叫做熱塑性彈性體。
52 、Regarding the optimal formulation of PP/MPP1/CaSO4(97/3/30),blending with adequate dosage of EPDM or TPE(thermoplastic elastomer)respectively, the properties of composite could balance the strength andtoughness.───在性能最佳的復合體系PP/MPP1/CaSO_4（97/3/30）中，分別加入適量三元乙丙橡膠EPDM和熱塑性烯烴類彈性體TPE時，可制得強度和韌性較為均衡的三元復合材料。
53 、Structure design of elastomer is the key step of yarn tension sensor design.───摘要彈性體的結構設計是紗線張力傳感器設計的關鍵。
54 、Product Information: Thermoplastic Elastomer Compounds for Product Development and Design.───企業簡介:主營產品:熱塑性塑料,人造橡膠,化合物產品。
55 、Elastomer is a class of polymers whose deformation displayed by strain-stress curve is totally elastic, i.e., large recoverable strains produced at low stress levels.───彈性體是聚合物的一個種類，它的應力－應變曲線表明其變形是完全彈性的，即很低的應力變化就會產生很大的可回復應變。
56 、The graft copolymerization of SBS thermoplastic elastomer is carried out by MMA and BA in mixed Solvent adhesive is preparated by addition of tackifing resin.───以丙烯酸酯類混合單體對SBS熱塑性彈性體在混合溶劑中接枝共聚，添加混合型增粘樹脂，研制成接枝改性的SBS膠粘劑，具有較高的初粘力和終強度。
57 、The drive band and retainer feature a hex-drive system to distribute drive loading evenly and eliminate overstressing of the flexible elastomer bellows.───傳動環和護圈配置一個六角傳動系統,均勻的分配傳動負載,消除柔軟的彈性波紋管上的過度應力。
58 、NINGBO POLYMAX ELASTOMER TECHNOLOGY CO., LTD.───寧波普力馬彈性體技術有限公司。
59 、Container inside lining includes polyurethane elastomer and rubber.───容器內襯分聚氨脂彈性體和橡膠。
60 、Materials for sling: terylen tape, nylon tape, elastomer thread, PVC tape, etc, having processes of noctilucence, fluorescence, repercussion, jacquard weaving by computer, etc.───吊帶材料有：滌綸帶、尼龍帶、高彈絲、PVC帶等，并有夜光、瑩光、反光、電腦提花等工藝。
61 、Polyethylene octene elastomer (POE) as impact modifier was incorporated into wood/polypropylene composites (WPC) to enhance the impact strength of the composite.───摘要使用乙烯-辛烯共聚物(POE)作為木粉／聚丙烯復合材料的抗沖改性劑，旨在提高木粉／聚丙烯復合材料的抗沖擊強度。
62 、Daytona 500 fragrance for men by Elizabeth Arden features a cap with anodized thermoplastic elastomer (TPE) with the product name embossed on the side.───代托納香水500 ，男性由伊麗莎白雅頓功能與陽極帽熱塑性彈性體（熱塑性彈性體）產品名稱浮雕的一側。
63 、By using the propagating theory of elastic wave the attenuation mechanisms of the elastomer with cylindrical bores is analyzed.───摘要應用彈性波在帶圓柱通道橡膠體內傳播的理論，分析了穿孔橡膠體的吸聲機理。
64 、Introduction: Produced with the advanced technology imported from Britain, KEC water type chassis elastomer is a new generation water type environmentally friendly product.───產品簡介：引進英國最新技術，是新一代水性環保產品。
65 、Development history, manufacture, application and advance of fluorocarbon elastomer coatings were sketched.───對氟碳彈性體涂料的發展史、制造與施工、應用及進展進行了簡介。
66 、A trace is automatically recorded of the resistance of the elastomer to penetration and the depth of penetration.───彈性體對于穿透的阻力和穿透深度曲線自動記錄下來。
67 、A thermoplastic polyurethane elastomer was extended in the melt state through twin-screw extruder with prepolymer as chain extender.───修正了嚙合同向雙螺桿擠出機中的聚苯乙烯停留時間分布的一維模擬模型。
68 、The paper presents a new miniature five DOF force/toque sensor for multi-finger dexterous hand, and a highly integrated structure for the elastomer is used in the sensor.───摘要本文介紹了一種新型用于多指靈巧手的微型五維指尖力/力矩傳感器。
69 、Spray polyurea elastomer(SPUA) material is a novel one made by spray technology which contains 100% solids and no solvent(0 VOC's) .generating no pollution.───噴涂聚脲彈性體(SPUA)材料是采用噴涂工藝制成的100%固含量、無溶劑、無污染的新型材料。
70 、Proffesional manufact and make weighing elastomer, al. products.───專業生產和制造稱重彈性體，鋁制品。
71 、Containers elastomer High impact &resistance to low temp.───含氮阻燃級，高強度，低變形。
72 、The elastomer pinch sleeve shall be one piece construction with integral flanges drilled to be retained by the flange bolts.───人造橡膠夾管套管應該是一件式結構，并帶整體法蘭安裝孔，以便固定法蘭螺栓。
73 、With the amount of chain-extender BDO added,the performance of elastomer becomes well,but when the amount of BDO comes to a certain point it appears reverse.───以BDO擴鏈為例,隨其用量的增加,彈性體的性能提高,達到一定值后再增加用量性能反而下降;
74 、Micro-cellular foaming elastomer is an important polymer material, It have become a study hotspot because it can fit many aspects with parlicular capabilities.───摘要微發泡彈性體材料是一種重要的高分子材料，它有其獨特的微孔結構能夠滿足多方面的需要，因此也成為近來一段時間研究的熱點。
75 、Abstract: Crystallinity and mechanical properties of poly(ester-ether)liquid crystalline elastomer and their fibers were investigated by WAXDand Single Fiber Electronic Tensile Strength Tester.───文摘:利用廣角X－射線衍射儀和單纖維電子強力儀對聚酯醚液晶彈性體及其纖維的結晶性和力學性能進行了研究。
76 、The title contings has been developed based on aliphatic PU elastomer as binder,mixed with superdispersant and nano ATO conductive powder.───以脂肪族聚氨酯彈性樹脂為基體,透明納米ATO導電粉為導電介質,添加超分散劑,采用物理與化學相結合的分散方法對納米ATO進行預處理。
77 、The result indicated that the toughening effect of phenolic foams was best when using the thermoplastic elastomer.───實驗結果表明，熱塑性彈性體對酚醛泡沫塑料的增韌效果最佳。
78 、Introducing isocyanurate group can enhance the heat resistance property of polyurethane (PU) elastomer, but has some effects on the other properties of PU elastomer.───引入異氰脲酸酯基團可提高聚氨酯彈性體的耐熱性能,但同時對其他性能有一定影響。
79 、By that right Surface Modification on Mineral,it is obvious Reinforced on the rubber/PVC elastomer.───對礦物填料進行適當?shù)母男蕴幚?使橡膠/PVC彈性體具有明顯的補強效果。
80 、The organic combined technology of sprayed polyurea elastomer and spayed polyurethane foam is suitable for site spray of waterproof and thermal insulation roof.───噴涂聚脲彈性體及噴涂聚氨酯彈性體技術,兩者有機結合,適用于防水、保溫屋面的現場噴涂。
TPE是什么意思？
材料供應商提醒您，手表材料的TPE（Thermoplastic Elastomer） 是一種具有橡膠的高彈性，高強度，高回彈性，又具有可注塑加工的特征的材料。具有環保無毒安全，應用范圍廣，有優良的著色性，觸感柔軟，耐候性，抗疲勞性和耐溫性，加工性能優越，無須硫化，可以循環使用降低成本，既可以二次注塑成型，與PP、PE、PC、PS、ABS等基體材料包覆粘合，也可以單獨成型。
熱固性彈性體是什么材料？
熱固性彈性體
熱固性聚氨酯彈性體thermeset polyurethane elastomer在熱、催化劑、壓力、紫外光等作用下，發生化學反應而形成體型的聚氨酯彈性體。受熱不再熔化，強熱則分解，不叮反復塑制。具有優異的物理性能，特別是在高溫或低溫下的壓縮變形性能好L.已廣泛應用于汽車、礦山、建筑、印刷等行業_